Product Description
1-1/2" Port Size for "Weld Bead" Type Header Applications
For use with "Raised" Weld Bead Headers - Additional sealing material is provided around the weld bead to provide a better seal.
Compare to Fel-Pro MS92467
Fits the following applications:
GM Car:
325/ 5.3L - LS1 Vortec ('05-'08)
346/ 5.7L - LS1 ('97-'04) GTO (2004), Camaro & Firebird ('01-'02)
346/ 5.7L - LS6 ('01-'05) Vin Code "S"
364/ 6.0L - LS2 ('05-'07) Vortec
GM Truck:
293/ 4.8L Vortec ('99-'08)
325/ 5.3L Vortec ('99-'08)
364/ 6.0L Vortec ('99-'08)
376/ 6.2L (2008 & Up)
Isuzu Truck 5.3L ('03-'07)
Corvette Header Applications:
5.7L (1997 - 2004)
6.0L (2005 - 2007)
6.2L (2008) (2009 & Up -Including Vin Code W)
2/Set
(See 2008 and 2049 for additional Header Applications)
• Seals Warped Flanges
Remflex exhaust gaskets come in a standard 1/8-inch thickness and are designed to crush 50%. This allows them to fill gaps in the flange surface up to 1/16-inch!
• Won’t Burn Out
100% flexible graphite construction means Remflex gaskets are good for up to 3,000 degrees F—far exceeding that of any vehicle’s exhaust system temperature!
INSTALLATION TIPS: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
