MSD Ignition Kit Digital 6AL-2/Distributor/Wires/Coil/Harness 86-93 Ford Mustang

Product Description

SK Speed Part # M469152

Included is an MSD Digital 6AL-2 Ignition Box (6421), Pro-Billet Distributor (8456), 8.5mm Super Conductor Wire Set (31329), Blaster TFI Coil (8227), and an MSD Ford TFI Wiring Harness (8874). We've put together a complete kit to take the guess work out of choosing the right components for your '86-93 5.0 EFI Ford Mustang, or any 5.0 EFI Ford TFI ignition equipped engine such as those in 5.0L Trucks & Lincolns!

Digital 6AL-2 Ignition Box - Part #6421

MSD is excited to announce the next generation of 6-Series ignition  controls – the 6AL-2! The all new ignition control combines a new  housing, new digital controls and more power in a sleek package. Inside  the new cast aluminum housing you'll find an advanced micro-controller  that manages the timing and rpm of the ignition. The spark output of the new box has been turned up to 535 volts of primary voltage with spark  energy reaching up to 135millijoules! The multiple sparks of the 6AL-2  burn in the cylinder for 20 degrees of crankshaft rotation to ensure  complete combustion. Two more great features are the rev limits! There  are two rev limiters; one for high end overrev protection and another  you can activate off a clutch or transbrake to set a launch limit. This  feature will help your car blast off the starting line! Adjustments are  made via four rotary dials for 100 rpm increment control! The all new  capacitive discharge ignition will easily connect to nearly any 12-volt  negative ground distributor system.

Pro-Billet Distributor - Part #8456

When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state-of-the art Computer Numerical Control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire rpm range of your engine. The shaft is also QPQ-coated for friction reduction and corrosion resistance. The Pro-Billet Distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a high-quality cap with brass terminals for full spark delivery, heavy-duty rotor and a special gear to work with roller cams.

8.5mm Super Conductor Wire Set - Part #31329

The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a straight end (bendable to 45 degrees) at the spark plug. A coil wire is included as well.

Blaster TFI Performance Ignition Coil Part - #8227

Top off your Ford Ignition system with these great new replacement coils. The Blaster TFI Coils have MSD performance in factory style housings! MSD designed these Coils by combining their Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. 44,000 volts to be exact! The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

Ford TFI Wiring Harness - Part #8874

MSD offers these wiring harnesses to simplify the installation of a MSD 6 series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.