MSD 9975 Ignition Upgrade Kit 86-95 Mustang 5.0L Digital 6A Box/Coil/Cap & Rotor

MSD started with a clean slate and drew up plans for an all new housing. They kept the same footprint as the traditional 6A but lowered the profile for a sleek look. The wiring is all routed out one end of the unit through a sealed and locking connector.

Inside the Digital 6A you’ll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the new Digital 6A delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation!

The new Digital 6AL are supplied with the wiring harness and the components you’ll need for installation. The 6A is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups.

Blaster TFI Performance Ignition Coil - Part #8227

Top off your Ford Ignition system with these great new replacement coils. The Blaster TFI have MSD performance in factory style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. 

MSD TFI Cap & Rotor Kit - Part #8482

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits 

Adapter Harness Ford TFI - Part #8874

MSD Ignition Controls are easy to install, but we also offer several plug-in Harnesses. These are especially handy for quick installation on late model vehicles! The Harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD. Two wires go from the MSD to the battery and you’re done with no cutting or splicing!