Product Description
Competition Engineering’s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
Competition Engineering’s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It’s as simple as twist and click.
Extended Length: 16.84"
Collapsed Length: 10.37"
Upper Mount: Stud
Lower Mount: Eyelet
Fits:
Dodge Challenger 1970-’74
Dodge Charger/Coronet 1965-’78
Dodge Dart/Demon/Swinger 1964-’76
Dodge Lancer 1962-’78
Dodge Magnum XE 1977-’79
Dodge Monaco 1962-’78
Plymouth Barracuda 1964-’74
Plymouth Belvedere/Fury/Savoy 1962-‘70
Plymouth Satellite 1965-’72
Plymouth Valiant/Duster/Sport Scamp 1964-’76
Plymouth GTX 1967-’70
Plymouth Road Runner 1968-‘75
